• MOTO GUZZI
• BREVA 750 2003 > 2009
• CALIFORNIA II 1000 1981 > 1987
• CALIFORNIA III 1000 1987 > 1993
• GT 1000 1987 > 1993
• LE MANS III 850 1981 > 1984
• LE MANS III 1000 1983 > 1984
• LE MANS IV 1000 1985 > 1989
• LE MANS V 1000 1990 > 1993
• NEVADA 750 CLASSIC / AQUILA NERA 2004 > 2011
• NEVADA 750 CLUB 1991 > 2003
• NEVADA 750 S 2010 > 2011
• NTX 650 1987 > 1990
• NTX 750 1986 > 1990
• S 1000 1990 > 1993
• SP 750 1990 > 1992
• SP II 1000 1984 > 1988
• STRADA 750 1993 > 1995
• STRADA 1000 1993 > 1996
• T5 850 1983 > 1989
• T 750 1991 > 1993
• TARGA 750 1990 > 1992
• V7 CAFE' 2009
• V7 CLASSIC 2008 > 2012
• V7 RACER 2010 > 2011
• V50 500 MONZA II 1986 > 1989
• V65 650 1981 > 1987
• V65 650 C 1983 > 1986
• V65 650 FLORIDA 1985 > 1992
• V65 650 GT 1988 > 1989
• V65 650 LARIO 1984 > 1989
• V65 650 PA (NUOVO TIPO) 1988 > 1995
• V65 650 SP 1982 > 1985
• V65 650 SPORT 1983 > 1986
• V65 650 TT 1984 > 1989
• V75 750 1985 > 1990
• V75 750 PA (NUOVO TIPO) 1986 > 2001
• V75 750 PA (VECCHIO TIPO) 1992 > 1996
• X / XPA POLIZIA 750 1992 > 2002

The panel / cylindrical air filter is commonly referred to as "replacement air filter". It is installed in the vehicle's original airbox to replace the OEM air filter. It is made of highly performing materials that allow an increased air flow combined with a more efficient filtration, guaranteeing containment of all impurities from as small as 7 microns (compared to OEM's 10 microns).

Air flow chart for a sample BMC air filter against an OEM paper filter

Temperature 25C° - Humidity 25% - Pressure 1020mbar 

Test ran with oem airbox, and the related air flow constrictions.

This chart has a pure illustrative purpose and does not refer to the present filter.

BMC air filters are produced using a "Full Moulding" system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes.

BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.

All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.