Features:

• Arch and Achilles areas are covered with Sidi’s exclusive elastic textile and injection molded polyurethane comfort panels
• Arch area utilizes two TPU bands next to the TECNO-3 magnetic closures for a maximum support and wrap of the arches
• Asymmetric and shaped shock absorbing heel cup, smooth and flat inside for more adherence with the bike, with shock absorbing system in the back and outside
• The shell and the shock absorbing system are replaceable through a screw  and  an interlocking system
• Nylon inner sole with removable arch support pad
• Replaceable external shin, heel and toe sliders 
• Nylon inner sole
• Dual compound sole
• High stress areas are double stitched
• TPU shift pad
• Perforated, Teflon treated nylon inner lining with Cambrelle lining in the toe area
• Recessed screws used to attach replaceable parts so as to not damage bike
• Toe slider made from nylon reinforced with fiberglass
• Toe Slider features air intake and alloy insert
• Adjustable calf on the Sidi Mag-1 Boots can accommodate riders with up to an 15-inch calf diameter when measured 11.5-inches up from the bottom of the heel

When constructing most of Sidi boots, Sidi uses a new generation material called “Technomicro”. Technomicro is a composite microfiber material created from strands that are so fine, each one is less than one thousand  the thickness of silk. These fibers act like natural leather skin, but with the advantage of better strength, softer texture and lighter weight. Technomicro is also water resistant, highly resistant to abrasion and tearing and is easy to clean and maintain. Technomicro doesn’t stain and offers reduced weight, more flexibility and a better feel than leather or other synthetic material boots

Replaceable shin plate in polyurethane

An all new Micrometric Tecno-3 magnetic closure mechanism is easy and quick to use as well as being highly adjustable and light in weight.

The TECNO-3 Magnetic closures close the boot with an extremely resistant steel wire, that is hooked to the clip with the aid of a magnet. Mechanisms and retaining clips are replaceable.

Arch and Achilles areas are covered with Sidi’s exclusive elastic textile and injection molded polyurethane comfort panels. The arch area utilizes two TPU bands next to the TECNO-3 Magnetic closures, for a maximum support and wrap of the arches

The rear upper is made in polyurethane, and is assembled to the boot with two screws: one on the outside under the TECNO-3 Magnetic mechanism, the other on the inside which holds the micrometric adjuster strap. The screws support and block the internal support system which is made with carbon fiber beams, making up the frame of the boot.

This system allows excellent flex movement front-to-back while being firm side-to-side.

The Tecno-3 Magnetic mechanism and the micrometric memory strap adjust the leg circumference to fit around the calf muscle.

The toe slider is made in nylon reinforced with fiberglass. It is fitted with a new air intake and an innovative alloy insert

Asymmetric and shaped shock absorbing heel cup, smooth and flat inside, for more adherence with the bike, with shock absorbing system in the back and outside. The shell and the shock absorbing system are replaceable through a screw and an interlocking system

The “CE” marking means that the product meets the basic health and safety requirements of European Directive 89/686/EEC.